Send a sample request

Nobody looks at the edge. Until it is wrong.

We make the band that runs around the outside of every cabinet, wardrobe and worktop: laser-fused, metal-film, PVC and ABS. Cut, coated and matched to your board on one floor in Lankao, Henan.

A length of walnut-grain edge banding, cut edge facing camera, laid against a banded oak panel for scale
Walnut band, 0.8 × 22 mm, cut from a 300 m roll. The colour is read off your board, not off a chart.
0.4–3.0mm thickness range across the range
12–100mm slitting width, any step you need
200+decors held in the sample library
72hdecor matched from a board off-cut

A seam you cannot see

A 0.5 mm glue line shows from three metres away on a white board. Calender temperature, coating weight and roll hardness are set per decor, not per order.

Matched to your board

Post one off-cut. We read the decor under daylight, adjust the ink, and print a matched sample roll before you commit to a container.

Packed for a crossing

Humidity wrap, edge-protected pallets, cartons or loose rolls load-tightened into 20GP and 40HQ. Paperwork filed for China export.

The decor library

Woodgrains, solids and metallics we hold as reference. Anything not here gets matched from your board. Tap a chip to read its code.

Match first, order second.

Decor is the part that gets rejected at goods-in: a 2% tone shift on a white oak run shows across a whole kitchen. Before a container is booked we print a matched roll against your board under 6500 K daylight.

Open the full library
Select a chip to read the decor code.

One plant. Extrusion to pallet.

Resin goes in at one end of the line and wrapped rolls come off at the other. Nothing is subcontracted, which is why a mixed order of five families still leaves on one sailing date.

20years making banding on this floor
LankaoHenan plant, own extrusion and coating
2025national tech-SME certification
1utility model patent, adhesive backing unit
Profile extrusion line: extruder, die and downstream haul-off in the plant
Extruder and downstream. Width and thickness are checked at the die head, then again at slitting.
Inside the plant

How an order ships

The commercial terms most buyers ask for first. Tell us the market and we quote landed cost instead of FOB if that is easier to compare.

MOQ200 m per decor
mixed container ok
Lead time15–20 days
after deposit
Loading portQingdao
or as nominated
TermsFOB / CFR / DDP
discussed per order
PaymentT/T 30% deposit
balance on B/L copy

Post us one off-cut.

Send a 100 × 150 mm piece of your board with the decor name if you have it. We answer with a matched sample, a thickness recommendation and a price per metre, usually within three working days.

Send a sample request Browse decors first
Replies Mon–Sat, GMT+8. WhatsApp +86 158 2489 0528
Lankao County, Kaifeng, Henan, China
Home / Products

Five families, one tolerance sheet.

Laser, metal-film, PVC/ABS, hot melt and extraction hose. Specifications below are the standard range; the actual run is set per order and confirmed on the proforma.

LE‑100

Laser edge banding

No adhesive layer. The band carries a functional layer that the laser in your machine activates, so the polymer fuses directly into the board surface. There is no glue line to see and nothing to clean off the panel after trimming, which is the whole point on handleless fronts and full-height doors.

Zero glue lineHandleless frontsKitchen and wardrobeMatte / super-matte
PropertyStandard range
CarrierPP with PMMA functional layer
Thickness0.8 / 1.0 / 1.2 mm
Width22 / 23 / 35 mm, slit to order
SurfaceMatte, super-matte, soft-touch, woodgrain print
Roll length100–300 m, core 3"
PackingCarton, 10–20 rolls; palletised for LCL
A roll of oak-grain edge banding on a 3 inch paper core
Oak decor, 0.8 × 22 mm on a 3" core. Wound tight enough that the band feeds without telescoping.
MF‑050

Metal-film edge banding

A metallised aluminium layer on PET, laminated so the band bends around a 20 mm radius without cracking the film. Used where the panel is doing the talking: reception counters, retail shelving, hotel case goods. Brushed and mirror finishes are the two volume items; champagne and bronze run to order.

Brushed aluminiumMirrorChampagne / bronzeRetail fit-out
PropertyStandard range
ConstructionPET film with metallised aluminium layer
Thickness0.4 / 0.5 / 0.8 / 1.0 mm
Width22–45 mm
FinishBrushed, mirror, champagne, bronze, gunmetal
BendingHolds film integrity at 20 mm radius
PackingRoll in shrink wrap, carton of 10
Finish references held in the library.
Solid, metallic and woodgrain edge banding rolls lined up against a white background
Reference rolls: mirror, champagne, gunmetal, matte black, white and oak. Trimming and radius are where metal film is won or lost.
PV‑045

PVC / ABS edge banding

The volume line, and the one most orders start with. PVC and ABS in 0.4 to 3.0 mm, slit from 12 to 100 mm, printed or solid. ABS is the choice where the band has to take a post-formed radius or a heavy trim without chipping; PVC holds the price on flat door work.

0.4–3.0 mm12–100 mmWoodgrain and solidHigh gloss available
PropertyStandard range
MaterialPVC, ABS, PP
Thickness0.4 / 0.5 / 0.8 / 1.0 / 1.5 / 2.0 / 3.0 mm
Width12–100 mm, slit to order
SurfaceWoodgrain print, solid colour, soft-touch, high gloss
Roll length100–500 m depending on width
PackingCarton or pallet, humidity wrapped
Common decors on this line.
HM‑200

Hot melt adhesive

EVA and PA granules for the glue pot of your edgebander, matched to the band you buy from us so the two do not disagree at 180 °C. Sold as a trial carton with any first order; most buyers then set a standing quarterly volume.

EVA / PA160–200 °C25 kg carton
PropertyStandard range
BaseEVA, PA (polyamide) for higher heat
Application temp.160–200 °C
FormGranule, free flowing
Packing25 kg carton, 40 cartons per pallet

Glue and band from one supplier means one party to call when the seam opens in the field. We would rather hold that risk than hand it back to you.

TP‑100

TPU dust hose

Steel-wire reinforced PU hose for CNC extraction and edgebander chip suction, 50 to 200 mm bore, cut to length. Flexible enough to follow a moving gantry without kinking, and abrasion resistant where the chips run at speed.

50–200 mm boreSteel wire reinforcedCut to length
PropertyStandard range
MaterialPU / TPU with steel wire helix
Bore50 / 75 / 100 / 125 / 150 / 200 mm
Length5–20 m coils, cut to order
UseCNC extraction, edgebander suction, dust manifold

Not sure which thickness?

Tell us the board, the machine and the finish. We come back with the band, the glue and the trimming setting together, because those three decide the seam.

Home / Decors

A library you can hold against your board.

Every chip below is a reference we keep in the sample book and can run again. Anything missing is matched from your off-cut rather than ordered blind.

Tap any chip for its code, family and standard thickness.

Codes are our internal references, not board manufacturers' decor names. If you have the board brand and decor number, send those instead and we will short-circuit to the closest chip.

How the match runs

Seventy-two hours from the off-cut arriving to a matched roll leaving. Usually faster, but we quote what we can hold.

Step 01

The board arrives

One off-cut, 100 × 150 mm, with the decor name on the tape if you know it. Courier it to the plant, or photograph it against a grey card if the order is still at quoting stage.

Step 02

We read it

Value, hue and gloss are logged under 6500 K daylight, then cross-checked against the closest chips in the library. A board that reads 2% darker than our N‑201 is not N‑201.

Step 03

A trial roll is printed

Ink formula adjusted, 30 m run, wound and labelled with the batch. You get photographs the same day and the roll follows by courier.

Step 04

You sign it off

Approved roll becomes the colour standard for the production run. It stays on file, so the second container matches the first.

Send the decor, not a guess.

A photograph against a grey card is enough to start. A physical off-cut is enough to finish.

Home / Factory

One floor, one product.

Lankao County, Kaifeng, Henan. Twenty years of banding on the same site, with extrusion, printing, coating, slitting and packing under one roof.

Nothing is subcontracted

A banding order usually breaks into three suppliers: one extrudes, one prints, one slits. When the seam opens in a customer's workshop, all three point at each other. We keep the whole chain inside the plant so the tolerance sheet has one owner.

The practical difference shows up in small orders: a mixed run of five families, twelve decors and three widths is one production schedule here, not five purchase orders.

Utility model patent CN 223393737 U National tech-SME, 2025 Import / export licence
Extrusion hall with several profile lines running side by side
Extrusion hall. PVC, ABS and PP run in-house; slitting and packing are on the same floor.

What runs where

Five stages, each with its own check before the goods move on.

ExtrusionProfile lines, PVC / ABS / PP / PET
PrintingWoodgrain, solid, metallic film
CoatingMatte, super-matte, soft-touch, gloss
Slitting12–100 mm, tolerance ±0.2 mm
QCThickness, width, colour, adhesion
PackingHumidity wrap, carton, pallet

The run, in order

From resin to a pallet that survives a sea crossing.

01

Resin and colour

Resin is dried and the colour masterbatch weighed per decor, not per batch of mixed work. A shade that starts wrong cannot be corrected at the printer.

02

Extrusion and cooling

Profile comes off the die and over the cooling rollers. Thickness is measured at the die head and again after cooling, because the band shrinks as it sets.

03

Print, coat, cure

Woodgrain is printed in register, then coated. Matte and super-matte finishes are the two that show a glue line first, so those get the slowest line speed.

04

Slit, check, wrap

Slitting to width, then a batch check: thickness, width, colour against the approved standard, adhesion trial. Wrapped, cartoned, palletised, photographed before it leaves.

Thickness and width are checked at the die head and again after cooling, because the band shrinks as it sets.

Home / Export

The boring part, done properly.

Terms, documents and packing. If your purchasing team needs a landed cost rather than FOB, say so in the first email and the quote comes back that way.

MOQ200 m per decor, mixed container
Sample order1 carton, trial roll included
Lead time15–20 days after deposit
New decor+3–5 days for colour approval
TermsFOB Qingdao / CFR / DDP
PaymentT/T 30% deposit, balance on B/L copy
PackingCarton, or pallet for LCL
Markets servedRU / KZ, BR, CO, TR, EG, ES, US

Documents that travel with the box

Commercial invoice, packing list and bill of lading as standard. Certificate of origin and any chamber-of-commerce legalisation are prepared on request before booking, not after.

Where the destination requires heat-treated pallets, we use ISPM 15 stamped timber and mark the pallet accordingly.

How the rolls are loaded

Rolls are wound hard, shrink-wrapped, then cartoned in tens. Cartons are edge-protected and stacked so the cores do not take the container's weight. A load plan per decor goes with the packing list.

Mixed containers are sequenced heavy-to-light so the last cartons in are the ones you will open first.

Quote against your board.

Send the board, the width, the thickness and the monthly volume. The reply carries a per-metre price at the volume you actually buy, not at MOQ.

Home / Contact

Send a board off-cut.

One photograph against a grey card starts the conversation. One physical off-cut finishes it.

What we need to quote properly

Board type and thickness, band width, monthly volume, and the market you ship into. Everything else we can work out.

WhatsApp
+86 158 2489 0528
Email
sales@your-domain.com
Plant
Lankao County, Kaifeng, Henan, China
Hours
Mon–Sat, 08:30–18:00 GMT+8
Reply time
Within 12 working hours

This opens your mail app with the details filled in. Files such as board photographs can be attached there. Prefer chat? Send the same details on WhatsApp +86 158 2489 0528.

Questions buyers ask first

If yours is not here, put it in the form and it comes back with the quote.

What is the minimum order?+

200 m per decor, and a container can mix as many decors and widths as you need. For a first trial, one carton of 10–20 rolls is enough to run the machine and check the seam.

Can you match a board I already buy?+

Yes, that is most of what the sample lab does. Send a 100 × 150 mm off-cut; a matched trial roll is out within 72 hours of it arriving. Photographs against a grey card are enough for a first quote.

Do you do private label?+

Cartons print with your artwork and your code system. Minimum for printed cartons is one container; below that we ship neutral cartons with a printed label.

How long is production?+

15–20 days after deposit for decors already approved, plus 3–5 days where a new colour has to be printed and signed off. Laser banding runs slightly longer than PVC.

What are the payment terms?+

30% T/T deposit, balance against a copy of the bill of lading. L/C at sight is accepted for larger first orders. Terms are set on the proforma, not in passing.

Do you send samples?+

3–5 m of standard decors, free of charge, freight collected on your account. A matched roll against your own board is chargeable and credited against the first production order.